You can make settings for the webcast in the pre-live status as follows:
First, select which video source you want to have for your webcast or whether it is an "Audio only" stream. To do this, select the corresponding check box. Depending on your selection, you must perform further configuration.
This option requires that at least one VideoManager has been set up.
If you want a video from the stock of your VideoManager, then the selection of the appropriate VideoManager, the channel and video is necessary. These are selected from the drop down menus.
The channel structure in the drop down menu reflects the order of the channels (including the sub-channels) in your VideoManager .
3. Audio only
Activate the checkbox, if only the audio track should be made available. Furthermore, you can optionally display a screenshot during the live stream. To do this, specify the URL to the desired screenshot.