You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

DE

Settings for the stream which will be available after the actual event, are made in the Post-live area.

First, select which video source you want to have for your webcast or whether it is an "Audio only" stream. To do this, select the corresponding check box. Depending on your selection, you must perform further configuration.

The following options are available:

1. Use video from VideoManager

 

This option requires that at least one VideoManager has been set up.

If you want a video from the stock of your VideoManager, then the selection of the appropriate VideoManager, the channel and video is necessary. These are selected from the drop down menus.

The channel structure in the drop down menu reflects the order of the channels (including the sub-channels) in your VideoManager .

 

2. Use video URL
If you have selected this option for your stream, you can define the appropriate HLS - or DASH-URL.


3. Use DVR recording in Post-live

 If you want to play out the DVR recording of the live event, select this option.


4. Audio only

Activate this checkbox, if only the audio track should be made available. Furthermore, you can optionally display a screenshot during the live stream. To do this, specify the URL to the desired screenshot.