You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Settings for the stream which will be available after the actual event are made here in the "Post-live" pane.

First, select which type of source you want to use for your webcast. To do this, select the corresponding check box. Depending on your selection, you must perform further configuration. The following options are available:



1. Use video from VideoManager


This option requires that at least one VideoManager has been set up.

Enter the following settings:

ParameterDescription
VideoManager selectionFrom the drop down menu, select the desired VideoManager.
Channel selection

From the drop down menu, select the channel in which your desired video is located.

The channel structure in the drop down menu reflects the order of the channels (including the sub-channels) in your VideoManager.

Video selectionFrom the drop down menu, select the desired video.
Token ProtectionEnter the "shared secret" security code in the Token Protection field if the video you would like to use is token protected. See "Security Policy Configuration" in the VideoManager Pro Administration documentation for more information about where to find the shared secret code.
Offset start (seconds)Define the starting time of the video stream (in seconds). If the value is set to 0, the specified video starts from the original beginning.


2. Use video URL

If you have selected this option for your stream, you can define the appropriate HLS URLs.

Enter the following settings:

ParameterDescription
HLS URLEnter the appropriate HLS URL.
Offset start (seconds)

Define the starting time of the video stream (in seconds). If the value is set to 0, the specified video starts from the original beginning.

The offset value is only applicable to HLS streams using Akamai CDN; the Akamai account must be enabled for Stream Packaging.


3. Use DVR recording in Post-live

If you want to play out the DVR recording of the live event, select this option.

Enter the following settings:

ParameterDescription
Offset start (seconds)

Define the starting time of the video stream (in seconds). If the value is set 0, the specified video starts from the original beginning.